Mounting
50
User’s Manual V1.00
DLoG MTC 6
7.5.2.
Position of the DLoG MTC 6 in the vehicle
In the vehicle, the driver's field of view must be kept free.
If a keyboard and scanner should be installed on the DLoG MTC 6, please plan sufficient
space.
No part of the DLoG MTC 6 system may project beyond the vehicle.
Figure 7.3: Position of the DLoG MTC 6 on a forklift
7.5.3.
Overview of the assembly steps
Before fastening the DLoG MTC 6 to the vehicle:
•
the shutdown automation must be configured
•
the forklift must be prepared (connection to ignition, correct voltage, etc.)
We recommend the following installation sequence:
•
Step 1: Fasten the bracket to the vehicle
•
Step 2: Install DLoG MTC 6 to the bracket
The DLoG MTC may not
project outside the vehicle!
