Device description and Technical specifications
DLoG MTC 6
User’s Manual V1.00
21
3.5.9.
Power supply
The device model is displayed on the device type plate!
DC power pack
12/24 VDC
30 W internal
Type DC-11
12/24 VDC nominal
Voltage range: 9 to 36 VDC
Voltage drops of up to 5 V and up to 20 seconds can be bridged
Bridging of power failures of 5 ms at 12 VDC
Start voltage at least 9 VDC
Galvanically isolated
Maximum output: 30 W
Withstands bursts up to 2 kV
Nominal current of 4.2 / 1.0 A
Connection to SELV circuit
*)
only
DC power pack
24/48 VDC
30 W internal
Type DC-12
24/48 VDC nominal
Voltage range: 18 to 60 VDC
Voltage drops of up to 5 V and up to 20 seconds can be bridged
Bridging of power failures of 5 ms
Galvanically isolated
Maximum output: 30 W
Withstands bursts up to 2 kV
Nominal current of 2.5 A / 1.2 A
Connection to SELV circuit
*)
only
Power
consumption
DLoG MTC 6/10: typically 20 W
Standby typically 1 W
(DLoG MTC 6/10 with DC power pack in standby mode)
*)
The SELV circuit is a secondary circuit that is designed and protected so that its
voltages will not exceed a safe value both when operating correctly or if a single error
occurs.
