DKT A/S
Fanoevej 6
DK-4060 Kirke Saaby
Tlf
Fax
E-mail
Web
+45 4646 2626
+45 4646 2625
www.dktcomega.com
Network Managed Optical Amplifier
User’s Manual Rev 1.3
OFA-CCS/CCD Series
June 2014
15
Table 7. Provision Menu Descriptions
ACT State
DEACT State
EDFA: normal operation
EDFA: normal operation
Status LED: Green
(Alarm information is not detected)
4.2.3
Control
In the Control Menu, the optical output power of the EDFA can be controlled by Laser
ON or Laser OFF. Also you can select the Buzzer sound in the Buzzer Control menu.
From the MAIN MENU using the Menu switch move the cursor to the “Control”.
If you push Enter switch, the cursor moves to the “LASER” menu.
Laser ON
From the below screen the first line indicates the current selected laser state of the EDFA.
If you want to select a different state from your current laser state, using the Up or Down
switch, move the cursor to the menu that contains the state you wish to select.
-
To activate the output of the EDFA normally, put the cursor on the LASER ON position.
Push the ENTER Switch (Laser Key switch is ON state).
If the Laser Key switch is OFF state, Laser On/Off is not changed, it remains the same
state.
Push
Enter or Menu switch.
If
you
want to turn off the output of the
EDFA,
push the Enter switch to move the
cursor to the “OFF” position.
Provision
> Control
Laser Off
Setting On
Laser Off
Setting Off
Set & Store
Laser : On
Key switch
Check Please..
> LASER
BUZZER
