dji PHANTOM 3 4K User Manual Download Page 42

Page: 42 / 60

Flight

Phantom 3 4K

User Manual

GPS Signal Weak

Blinking Yellow

Flight Limits

DJI GO app

Aircraft Status Indicator

Maximum

Flight

Altitude

Height is restricted to 400

feet. (120m) and under.

Warning: Height limit

reached.

None.

Max Radius No limits

If you fly out of the limit, you can still control the Phantom 3, but cannot fly it any father. If the

Phantom 3 flies out of the max radius in Ready to Fly (non-GPS) mode, it will fly back within

range automatically.

If the Phantom 3 flies out of the max radius in Ready to Fly (non-GPS) mode, it will fly back

within range automatically.

No-Fly Zones

All No-Fly Zones are listed on the DJI official website at http://flysafe.dji.com/no-fly. No-Fly Zones are

divided into Airports and Restricted Areas. Airports include major airports and flying fields where manned

aircraft operate at low altitudes. Restricted Areas include border lines between countries or sensitive

institute. The details of the No-Fly Zones are explained as follow:

Airport

(1) Airport No-Fly Zone are comprised of Take-off Restricted zones and Restricted Altitude Zones. Each

zone features circles of various sizes.

(2) R1 miles (value of the R1 depends on the size and shape of the airport) around the airport is a Take-

off restricted zone, inside of which take off is prevented.

(3) From R1 mile to R1 + 1 mile around the airport the flight altitude is limited to a 15 degree inclination.

Starting at 65 feet (20 meters) from the edge of airport and radiating outward. The flight altitude is

limited to 1640 feet (500 meters) at R1+1 mile

(4) When the aircraft enters within 320 feet (100 meters) of No-Fly Zones, a warning message will appear

on the DJI GO app.

GPS Signal Strong

Blinking Green

Flight Limits

DJI GO app

Aircraft Status Indicator

Maximum Flight

Altitude

Aircraft's altitude cannot

exceed the specified value.

Warning: Height

limit reached.

None.

Max Radius

Flight distance must be within

the max radius.

Warning: Distance

limit reached.

Rapid red flashing

when close to the

max radius limit.

Summary of Contents for PHANTOM 3 4K




















































Search results

Summary of Contents for PHANTOM 3 4K

Reviews:

Related manuals for PHANTOM 3 4K

Brands by name

Popular brands

dji PHANTOM 3 4K, User Manual

Search results

Summary of Contents for PHANTOM 3 4K

Reviews:

Related manuals for PHANTOM 3 4K

Brands by name

Popular brands