Flight
Phantom 3 4K
User Manual
44
©
2016 DJI. All Rights Reserved.
GPS Signal Strong
Blinking Green
Zone
Restriction
DJI GO app Prompt
Aircraft
Status
Indicator
No-fly Zone
Motors will not start.
Warning: You are in a No-fly
zone. Take off prohibited.
Red flashing
If the aircraft enters the
restricted area in A-mode, but is
switched to P-mode, the aircraft
will automatically descend, land,
and stop its motors.
Warning: You are in a no-fly zone.
Automatic landing has begun.
Restricted-
altitude flight
zone
If the aircraft enters the restricted
area in A-mode, but is switched
to P-mode, it will descend to an
appropriate altitude and hover
15 feet below the altitude limit.
R1: Warning: You are in a
restricted zone. Descending to
safe altitude.
R2: Warning: You are in a
restricted zone. Maximum flight
altitude is restricted to between
20m and 500m. Fly cautiously.
Warning zone
No flight restriction applies, but
there will be a warning .
Warning: You are approaching a
restricted zone, Fly cautiously.
Free zone
No restrictions.
None.
None.
Semi-automatic descent: All stick commands are available except the throttle stick command
during the descent and landing process. Motors will stop automatically after landing.
When flying in a safety zone, the aircraft's status indicator will blink red rapidly and continue
for 3 seconds, then switch to indicate current flying status and continue for 5 seconds at which
point it will switch back to blinking red.
For safety reasons, please do not fly close to airports, highways, railway stations, railway lines,
city centers, or other sensitive areas. Fly the aircraft only within your line of sight.
