©2012 DJI Innovations. All Rights Reserved.
33
STEP3:
Hold your aircraft vertically and rotate it (its nose is downward) around the vertical axis (about
360
o
) until the LED turns off, meaning the calibration is finished.
STEP4:
The LED indicator will show whether the calibration was successful or not.
If the calibration was successful, calibration mode will
exit automatically.
If the LED keeps flashing quickly Red, the calibration has failed. Switch the control mode switch
one time to cancel the calibration, and then re-start from step 1.
Tips:
If you keep having calibration failure, it might suggest that there is very strong magnetic interference
around the GPS & Compass module, please avoid flying in this area.