©2012 DJI Innovations. All Rights Reserved.
31
of charging.
Make sure your ESCs protection voltage is lower than 3.1V (1S), otherwise low voltage protection
will not work.
Acquire the line loss voltage by the above method, and then fill it in Loss. Then fill a reasonable warning
voltage in the No Load.
Notices:
When red LED starts to blink, you should land ASAP!
STEP4: Second Level Protection
1
Fill the warning voltage and the line loss voltage in No Load and Loss by the method introduced in
previous step.
2
When the second level protection is triggered, the LED warning will be on. Meanwhile the center point
of throttle stick will move up slowly to 90% of endpoint, you should land ASAP to prevent your
multi-rotor from crash or other harmful consequences!
3
When the center point is at 90% of endpoint, multi-rotor will still start to ascend slowly if you continue to
pull the throttle stick back, and the control of Pitch, Roll and Yaw are the same as before. Please land
ASAP to prevent your multi-rotor from crash or other harmful consequences!