©2012 DJI Innovations. All Rights Reserved.
13
2 Motor Mixer
STEP1: Mixer Type
Set your transmitter into ACROBATIC mode. Then select the right mixer type according to your multi-rotor.
Tips:
We support six types of multi-rotors. Refer to
Multi-Rotors Supperted
in Appendix:
Notices:
Do NOT follow instruction from 3
rd
party multi-rotor manufacturer! Make sure the rotation direction of
each motor is the same as the way up figure shows. If not, switch any of two wire connetcions of the
incorrect motor to change its rotation direction.
Make sure the type of propeller matches the rotation direction of the motor.
STEP2: Motor Idle Speed
Motor Idle Speed is the lowest speed after motors start. Setting the Motor Idle Speed will affect the motors
lowest speed after the motors start. There are five levels from LOW speed to HIGH speed, and the default is
RECOMMEND. You can click and drag cursor
to the corresponding level, to change Motor Idle Speed.
LOW
RECOMMEND
HIGH
The lower motor idle speed
The higher motor idle speed
Setting the Motor Idle Speed as LOW, the motor idle speed will be at its lowest point.
Setting the Motor Idle Speed as HIGH, the motors idle speed will be at its highest.
RECOMMEND is the advised level.
You can reset the Motor Idle Speed according to your personal preference.
Notices: