©2012 DJI Innovations. All Rights Reserved.
19
blinking
if in fail-safe mode.
5.
If your transmitter does not support Fail-Safe, the Fail-Safe function will not work when the
communication between MC and transmitter is disconnected.
6.
Do not use 4-channel Futaba transmitter with S-Bus receiver, otherwise MC will work in Fail-Safe
mode.
7.
If users set GPS Atti. Mode in Control Mode Switch without connecting to GPS module, the M.C. will
switch GPS Atti. Mode into Atti. Mode automatically, and LED indicator will Blink yellow, that is if the
3-poisition switch is the same as 2-position switch.
8.
Once the MC goes into the Fail-Safe Mode, and you are using the GPS, the aircraft will auto
Stop the Motors when landed; without GPS the aircraft the motors will not auto Stop when landed.