©2012 DJI Innovations. All Rights Reserved.
- 41 -
Ground Station Software Crash
Ground Station Software Crash will not affect the aircraft under mission execution. The aircraft will
keep going on the flight mission edited even the Ground Station Software crash. The Ground Station
Software can be launched again, but loss of the following information will happen: Altitude Offset
value, Aircraft tracks and Way points.
Solution
:
Click on the DOWNLOAD button, to retrieve the previously set way points from the DJI Autopilot main
controller.
Launch Flight Failure
Aircraft doesn‟t execute mission after click on GO.
Solution:
If aircraft is in the air, please ensure it is in Autopilot Mode, and there is no need to set center
position.
If aircraft is on the ground and does not takeoff, please use Assistant Software to setup the center
position and the throttle servo working range.
If Auto Takeoff fails, you may take off the aircraft and then land manually in autopilot mode, then
wait until throttle cut off automatically; or reboot the autopilot system to initialize the controller.
Action Usage Faults
If there is no output change on F4 channel when click on the Trigger in the Action Setting window
after connect to main controller.
Solution:
Please ensure the receiver has been connected.
Please ensure it is under the Autopilot Mode or Waypoint Mode.
Fig②
Fig①