©2012 DJI Innovations. All Rights Reserved.
- 38 -
4.6 Photogrammetry Tool
Photogrammetry tool is for creating the professional maps by aerial photography easily. In order to do that,
you need to setup the servo action and mission path correctly as follows.
Tips:
This tool is actually a functions combination. It simplifies the parameters setup procedure for the aerial
photography.
Fig.
①
Fig.
②
Fig.
③
STEP1:
Click ToolBox
Photogrammetry Tool to open the setting window, shown as Fig.
①
.
STEP2:
Click Config the shooting action to setup the servo action for the camera shooting action,
reference to section 4.4.
STEP3:
Click Reference Photo to see if the camera is working as you want.
STEP4:
Fill in the right Focal Length, Sensor Height, and Sensor Width according to the camera.
STEP5:
Fill in the Fly Height, H Overlap and W Overlap as you like. H Overlap and W Overlap
represent the overlap percentage across the sensor height and width.
STEP6:
Fill in the flight horizontal and vertical speed in H Speed and V Speed separately.
STEP7:
Choose turn mode between Adaptive_Bank_Turn and Stop and Turn.
STEP8:
Click Click to draw a region which you want to scan to choose an area, reference to section
4.5 to change the area.
STEP9:
Click Preview to preview the mission plan,
shown as Fig.
②
.
STEP10:
If everything is OK, click Generate to generate all waypoints. Now you will have a flight
mission generated automatically in the Editor, shown as Fig.
③
.
Tips:
You can edit any waypoint in the Editor after generate all waypoints.
