©2012 DJI Innovations. All Rights Reserved.
- 12 -
Target Line: Line between aircraft and current target.
Data Link Setting:
The waypoint number of one package.
Upload one package.
Retry one package timeout.
Sys_set
Altitude offset: Set up the altitude offset.
Height: Height mode.
Elevation: Elevation mode.
Sys_set
Data Record Folder: Include both Log and Mission Folders, for saving log files and flight
route files.
4.
Language(
语言
): Click to change language, English or Chinese.
中文
.
English.
5.
Help:
Check for Update: Update software here.
About: Check your DJI Ground Station version here.
6.
Enter location: Go to the location of your input.
7.
Fly Trace: Click to show the trace of aircraft.
8.
PathExtrude: Click if you want to see flight Path Extrude during mission editing.
9.
Map Details: Click to see map details.
10.
Instrument Board: Click if you want to display instrument board.
11.
Editor: Click if you want to display mission editor.
12.
Continue: If you switch into autopilot mode from waypoint mode, click Pause then click Continue,
the aircraft will continue the remaining (Unfinished) mission.
13.
Pause: Mission pause.
14.
Serial port selection.
15.
Connect: Click to connect to main controller.
16.
Aircraft: Click to find aircraft location.
17.
Real-time coordinates of aircraft, you can copy the data.
18.
One Key Takeoff: Click to take off the aircraft.
19.
Home Point: Find your home location.
20.
Real-time coordinates of home location, you can copy the data.
21.
Set Home Point: Change your home point.
22.
Go Home: Click to go home.
23.
To show Real mode or Simulation mode.
24.
Signal strength: Shows the connection state between controller and ground station.
25.
GPS: Real-time GPS signal quality.
