©2012 DJI Innovations. All Rights Reserved.
- 7 -
Connection
Antenna
Head
Ground End
·
You should have a DJI Ground Station installed laptop.
·
Use the USB Cable supplied by us to connect the
wireless data-
link
ground end to you laptop. One end of the USB cable has two
heads, make sure the communication interface is plugged into
your laptop. If the power supply is insufficient using one USB port,
then plug the power interface Into the laptop also.
Air End
·
900MHz wireless data-link air end has two CAN ports. When you use it with ACE autopilot
system and low voltage servo, you should connect one CAN port to sparE CAN port on
autopilot system, and connect another one to a battery whose output voltage is in the range
of wireless data-link air end working voltage.
·
2.4GHz wireless data-link air end has only one CAN port.
·
Usually connecting one CAN port on air end to any spare CAN port on DJI autopilot system is
enough.
·
WKM user should use it with PMU.
·
High voltage servos & FBL systems can drain the flight battery fast. Please make sure your flight pack
is sufficient for the flight time intended.
·
Make sure the antenna head of
Wireless data-link
air end is erect down, then you can have the
largest range.
Any spare CAN
port on DJI
autopilot system
Battery
ACE autopilot, low voltage servo and
900M data-link connection
Normal connection with
ACE, WKM autopilot system
Any spare CAN
port on DJI
autopilot system
Any spare CAN
port on DJI
autopilot system
Communication Interface
Power Interface
Ground Station
