DITECH DT5639, Instruction Manual

Page: 45 / 60

Operating modes and configuration
45
DEU
ENG ENG
2. Align the mounting plate horizontally on the flush-type box.
3. Install the mounting plate with the correct screws (see Q in fig. 2).
4. Install the interchangeable frame onto the mounting plate.
5. Position the device onto the mounting plate and latch it into the clips.
5.2.4 Installation in multiple combinations
The device can be used with frames of other manufacturers or be integrated in a
multiple frame. For installation in multiple combinations, install the mounting plate
of the device flushing with the already installed mounting plates/bearer rings and
align it to these. The device will fit into the frames of the following manufacturers:
Manufacturer Frames
Berker S.1, B.1, B.3, B.7 Glass
ELSO Joy
GIRA System 55, Standard 55, E2, E22, Event, Esprit
merten 1-M, Atelier-M, M-Smart, M-Arc, M-Star, M-Plan
JUNG A 500, AS 500, A plus, A creation
6 Operating modes and configuration
The setting wheel E provides the operating functions of the device. Depending on
the configuration, the settings are transmitted to the DITECH Smart Home iL Base
station or to the DITECH Smart Home iL app.