DITECH DT5639, Instruction Manual

Page: 51 / 60

Operating modes and configuration
51
DEU
ENG ENG
6.1.8 Selection of temperature display/humidity
The display alternately shows the actual or the set temperature as well as the hu-
midity, as required.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “
“ and confirm the selection by shortly pressing the setting
wheel.
• “ACT” for displaying the actual temperature (Default value) or
• “SET” for displaying the set temperature or
• “ACtH” for displaying the actual temperature and the current humidity
6.1.9 Configuration of DITECH Smart Home iL Base station
This menu allows to configure the DITECH Smart Home iL Base station in stan-
dalone operation.
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “
“ and confirm the selection by shortly pressing the setting
wheel.
If the room control unit is taught-in to more than one base stations, select
the desired base station with the setting wheel.
The device parameters “UnP1/UnP2” and the channel parameters “ChAn” are avail-
able in the configuration menu for the DITECH Smart Home iL Base station; these
parameters allow the modification of the pump lead and follow-up times, setback
temperatures, time intervals and many other parameters.