DITECH DT5639, Instruction Manual

Page: 50 / 60

Operating modes and configuration
50
ENG
DEU
ENG
“OSSF” serves for activating (“On”) or deactivating (“OFF”) the Smart Start/Stop
function. Once this function is activated, the system calculates in a self-teaching
way when it must start the heating/cooling process in order to provide the stored
temperature exactly at the defined heating times.
6.1.6 Setting date and time
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “
“ and confirm the selection by shortly pressing the setting
wheel.
3. Set the year, month, day and time by turning/pressing the setting wheel (E)
and conform each.
6.1.7 Offset temperature
Since the temperature is measured at the room control unit Display, it may be warm-
er or cooler in another position on the room. This deviation is corrected using the
offset temperature (up to ±3.5 °C).
1. Press and hold the setting wheel (E) in order to open the configuration menu.
2. Select the symbol “
“ and confirm the selection by shortly pressing the set-
ting wheel.
3. Turn the setting wheel and confirm the desired offset (max. ±3.5 °C) by shortly
pressing the wheel.