distyNotruf
pro
, Operating instructions
Un-subscription
The logical disconnection of the
distyNotruf
and the DECT base station is done by
deleting the DECT subscriber in the base station. This process also includes the removal of
relevant data in the
distyNotruf
through the DECT protocol as long as the function is
supported by the base station.
Process: see “Factory setting”.
This is the last step required by the system administrator to delete the subscription data of the
distyNotruf
from the system and thus unsubscribe the device.
Subscription data are deleted also by resetting to the default status ( Factory setting ).
After a maximum of 3 minutes, the
distyNotruf
switches to the sleeping mode: no LED
lights up, DECT activity is stopped.
A special feature is the "Factory setting" checkbox on the "Subscription" tab.
If you want to use a different AC than the factory value = 0000, you have to write this value
to the device with a the checkbox marked.
Page 7 of 33
