distyNotruf
pro
, Operating instructions
Setting through DTMF
Different parameters can be alternatively set with the help of the DTMF technology. Speech
contact is first established with the
distyNotruf
for this purpose and the remote subscriber
sends the respective sign.
After recognizing the desired setting, in this case the introductory sign ‘**9’, a one-minute
countdown begins for the modification of the desired parameter.
Following successful programming, a positive acknowledgment tone will sound and the
connection will be terminated.
Only one parameter can be modified.
•
Authentication Code ( AC ) '
* * 9 pin 5 <ac> #
'
( ac = 0..9, 4-/ 8- digits )
•
Volume of loudspeaker
'
* * 9 pin 1 <Volume value> #
'
( Volume value = 1 .. 5 )
•
Volume of ringing tone
'
* * 9 pin 4 <Volume value> #
'
( Volume value = 1..2 )
•
Emergency call number
'
* * 9 pin 2 <Calling number>
6
#
'
(Calling number max. 20 digits)
•
Busy call number
'
* * 9 pin 6 <Index>
7
<phone number> #
'
(phone number max. 20 digits)
•
Indication tone
'* * 9 pin 7 <Ton type>
8
#'
•
Off-hook mode
'
* * 9 pin 8 <Mode> #
'
(Mode = 1: no call answering,
2: answer by key,
3: 2) +/ after time (40 s),
4: immediately,
7: confirmation (0/1),
8: Special (xyz [n]),
9: M.-programming on,
0: M.-programming off)
•
Shock sensor
9
'
* * 9 pin 3 <Value> #
'
6 1st number = * internal, = # external number
→
→
7 Index = 1..4
8 Tone type: 0 = off, 1 = Location signal, 2 = Amok signal (see chap. „Indication tone“)
9 Timeout = 2 minutes
Page 22 of 33
