distyNotruf
pro
, Operating instructions
Man down
Alarm is reported in the mode “active” (/ ‘moved after timeout’) if motion is detected after a
specific period in which no vibrations/motions have been detected.
Motion detection
The values for “threshold” and “time out” can be set through configuration.
The profile can be adapted to needs by varying parameters and timeout.
Configuration is performed through
Function 21
. Timeout time can be set in this case,
between 20 and 254 seconds.
The ‘man down’ variation will then be active in the basic setting.
It will be set to ‘motion detection’ by setting the checkbox.
If an event is triggered, a speech connection established. This will be shown through a brief
flashing of the red LED.
The feature is switched off in the CS.
Examples of setting the functions:
a) Function “Man Down”, Timeout = 240 seconds
Alarm time of 4 minutes must be set through configuration.
Page 16 of 33
Mode “Active” / motion detection
Mode “Quiescence” / man down
