distyNotruf
pro
, Operating instructions
Subscription using PARK
RFPI/ PARI (= Channel element/Base station) is the default on which subscription is
performed. This information can be found in ASCOM as System Administrator under DECT/
Radio/RFPI 9014BC1008 (<- Example!).
The process is described as follows. This is performed with the help of the programming
station ( Function ‘set PARK’, manual entry ).
•
c_31_9014_bc10_08
Set the RFPI of the channel element that is
to be used for subscription.
(Please note the hexadecimal entry!)
The
distyNotruf
is subscribed as described above.
Subscription using SARI
In case of big systems (installation of multiple sub - systems), affiliation is regulated through a
SARI. This number will be disclosed to the system administrator and the new terminal device
set-up in the system.
The system is activated for subscription; the administrator has disclosed the SARI used (e.g.
3111111111115) and the new terminal device set-up in the system. The SARI is entered in
the device through the programming station (PS, see chapter on “Configuration of
parameters & changing functionality”) (
Function 14
). Subscription is now performed as
described above.
Configuration
Some settings were made in the device during production, which shall be
adapted to the respective purpose of application. For this purpose, see the
section on
“Requesting / Setting parameters”
as well as
“Configuration
data”
. Factory settings are listed in the chapter on
“Factory setting”
.
It is necessary to configure the device accordingly depending on
application. This is easiest when done with the aid of the programming
station – a special charging station with PC connection.
It is advisable to restart the
distyNotruf
after changing parameters. This
is done using
Function 3
at the end of the setting process on the
programming station.
Page 6 of 33
