distyNotruf
pro
, Operating instructions
Busy Call handling
(default: not activated)
Active if the checkbox "Call forwarding" is set (
function 46
).
If the line is busy during an outgoing call or the called party does not answer within 20
3
seconds, the tag will try to dial the next number. This will continue until the call succeeds
4
.
The alarm number and a further four entries (Busy call) form a list of five telephone numbers
which are used in sequence. It is always tried to call the alarm number first.
To detect this situation, the device evaluates the busy signal and/or free signal.
Call forwarding active
If this function is activated, an alarm call must be acknowledged by the receiver of the
emergency call with a DTMF sign ‘#’ (push button "#").
If the acknowledgment does not take place, the
distyNotruf
triggers an unsuccessful
emergency call and attempts to select it again or one of the additional programmed
numbers.
This ensures that an alarm is will reach the human helper and not "shipped" on a mailbox
or an answering machine.
An exception are internal calls. In this case confirmation is not necessary, because usual
DECT – Handsets can not send the appropriate acknowledgment.
Call acceptance (off-hook mode)
(standard: push button)
This is used to set how an incoming call should be taken.
Possibility:
•
Immediately (= announcement, see next section)
•
Key-press
•
Key-press or automatically after 40 seconds
•
No calls
Announcement (Incoming Call)
(default: not activated)
If a call is made through any random number, the
distyNotruf
builds-up the connection
immediately. The loudspeaker and the green LED are switched on and a brief tone informs
the user that an audio connection has been established with the caller.
3 Time is adjustable; value used as an example.
4 The connection must last as long for minimum time as set above.
Page 14 of 33
