![background image](http://html1.mh-extra.com/html/dish-network/167820/167820_user-manual_2509147019.webp)
7
S
WITCHING
B
ETWEEN
TV
AND
A
MPLIFIER
V
OLUME
C
ONTROL
When you set up the remote to control a TV, the
MUTE
and
VOLUME
buttons control the TV volume, even if your remote control is in
SAT
mode. However, if you want to use the
AUX
mode to control a tuner or
amplifier that has a volume setting, you can set up the remote to control
the tuner or amplifier’s volume instead of the TV volume while your
remote control is in
SAT
mode. Follow the instructions in the left
column to switch controlling volume in
AUX
mode. To change back to
controlling the TV volume in
SAT
mode, follow the instructions in the
right column.
7
Turn the equipment back
on and try some other
buttons to make sure they
work.
Press
POWER
to turn the
equipment back on. Try some
other buttons to make sure they
work. Sometimes
POWER
works when other buttons
don’t.
8
If necessary, repeat this
procedure until you’ve tried
all the codes.
You may need to repeat the scan
to find the best code for your
equipment.
9
Once you find a code that
works, consider using
Limited Mode.
See page S-6,
Placing Your
Remote in Limited Mode
for
putting your remote in Limited
Mode.
Control Amplifier Volume
Control TV Volume
1
Press and hold the
AUX
mode button for three
seconds, and then let go of
it. The
AUX
mode button
blinks.
1
Press and hold the
TV
mode button for three
seconds, and then let go of
it. The
TV
mode button
blinks.
2
Press the
POUND
(
#
)
button.
2
Press the
POUND
(
#
)
button.
Instructions
Additional Information
Summary of Contents for 167820
