Dish Network 167820, User Manual

Page: 17 / 48

5
6
If you want to program
Limited Mode, press 1.
If not, skip to step 7.
See Limited Mode on page 3 for
more information.
7 Press POUND (#). If you entered the code
correctly, the mode button
flashes three times.
8
Press
POWER
to turn off
the equipment. If the
equipment does not turn
off, go to step 10.
If the code works, the
equipment should turn off.
9
Turn the equipment back
on and try some other
buttons to make sure they
work. If the code works for
other buttons, stop here.
Note : If you have
programmed your remote in
Limited Mode, only the
MUTE
and
VOLUME
buttons work.
For example, sometimes
POWER works when other
buttons don’t.
10
If the code doesn’t work,
repeat steps 3 through 9
with another equipment
code from the tables.
Try every code listed for your
brand until one works for your
equipment.
11
If you can’t find a code that
works, try Scanning for
Equipment Codes that
follows.
Instructions Additional Information