![background image](http://html1.mh-extra.com/html/dish-network/167820/167820_user-manual_2509147018.webp)
6
S
CANNING
FOR
E
QUIPMENT
C
ODES
Instructions
Additional Information
1
Turn the equipment on.
Use the equipment’s front panel
buttons or its remote control.
2
Press and hold the mode
button until all the other
mode buttons light up, and
then let go of the button.
The mode button flashes.
For example, hold the
TV
mode
button for a TV until all of the
other mode buttons light. When
you let go,
TV
mode button
flashes.
3
For
AUX
mode only
. Press
0 for a second TV, 1 for a
second VCR, or 2 for a
tuner, or amplifier. Then
press the
STAR
(*) button.
This step is for programming
the kind of equipment that
should be programmed in
AUX
mode. If you’re not
programming in
AUX
mode,
skip to step 4.
4
Press
POWER
.
This step puts your remote in
the scan mode.
5
Press either the
UP
or
DOWN ARROW
repeatedly until the
equipment turns off.
As you press the
UP
or
DOWN
ARROW
, the remote tries each
code in the memory to see if it
can turn off your equipment.
When the equipment turns off,
you have found a code that
might work.
Note
: The mode button for the
equipment flashes rapidly eight
times when you’ve scanned all
the codes for that equipment.
6
Press
POUND
(#).
The mode button flashes three
times if you have entered the
code correctly. This step stores
the code you found.
Summary of Contents for 167820
