t
Reflex Duplicator Manual
- 15 -
Tutorial Guide:
III.
Select the Duplication Speed
This process will allow you to adjust the duplication speed
subject to your various needs.
By default, the duplication speed will be set to the optimal
speed. However, under some circumstances, you might want
to lower the duplication speed. Those circumstances are as
follows:
•
Blank Media Compatibility - When your media
compatibility is not good, lowering the duplication
speed is necessary to make good copies.
•
Poor Master Disc Quality - If your master disc
condition is not good, lowering the duplication
speed will reduce failure rates.
•
Duplication Quality - The lower the burn speed, the
higher the quality of your duplicates. When you have
time, it is a good choice to lower down the speed to
produce the best quality duplicates.
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1.
Navigate to Speed Selection Menu.
Press UP or DOWN arrow button to navigate to the
following screen.
DISCMAKERS 1.12
1. COPY
t
Reflex Duplicator Manual
- 16 -
2.
Press “ENT“ and the first option will be:
3.
Press ENT again to access Speed Selection Menu.
Then, you can press “ENT“ button to enter into Speed
Selection Menu.
You shall see the following:
4.
Select Duplication Speed Type.
There are four types of recording speed:
•
CD to CD: Copy CD Disc to CD-R Discs directly. (On-The-
Fly)
•
DVD to DVD: Copy DVD Disc to DVD±R Discs directly.
(On-The-Fly)***
•
HDD to CD: Copy Hard Drive CD Image to CD-R Discs.
•
HDD to DVD: Copy Hard Drive DVD Image to DVD±R
Discs.
Depending on what type of duplication and your duplicator
restrictions, you need to select the correct type in order to
take effect. To select the recording speed types, you need
to press UP or DOWN button to adjust and press “ENT“
button to submit your selection.
Setup
1. Select Burn Speed
DISCMAKERS 1.12
5. Setup
Select Burn Speed:
CD to CD SPEED
