t
Reflex Duplicator Manual
- 43 -
more information
3.
Enable the Account Management feature by
turning ON the Password on Boot UP setting.
Please refer to Feature Overview “5. Password on
Bootup“ below for more information.
This duplicator comes with standard license, which
allows you to create up to 32 users.
Account Management Feature Overview:
To access the account management feature, you need to perform
the following tasks:
When you turn on the duplicator, you shall see following:
Press UP or DOWN Button Consecutively until you see
following:
Press “ENT“ and use the UP or DOWN arrow keys until
you see the following:
Press “ENT“ button once. You will be asked for the
Administratorís Password.
By default, the Administratorís Password is “0000“. To
enter that, press UP or DOWN button to select the first
Utilities
7. Manage Accounts
Enter PWD (Admin)
[XXXX] OK
DISCMAKERS 1.12
1. Copy
DISCMAKERS 1.12
6. Utilities
t
Reflex Duplicator Manual
- 44 -
digit of your password and press “ENT“ button to submit
the current digit and you will be guided to select the next
digit. Repeat above steps until youíve selected all digits of
your password. After you have entered the password, you
need to press “ENT“ button on “OK“ to submit your
password.
Once your password is validated, you will be guided to
the main Manage Accounts screen like below:
There are five menus in the Manage Accounts:
1.
View User
This menu allows you to view current existing user
accounts.
- User “Admin“ is the administrative account.
It will always be there.
Press “ENT“ button to enter into this menu and press
“ESC“ button to go back to the main menu or cancel the
current selection.
2.
Create User
This menu allows you to create additional user accounts.
Manage Accounts
2. Create User
Manage Accounts
1. View User
Manage Accounts
1. View User
