t
Reflex Duplicator Manual
- 5 -
Tutorial Guide:
I. Make
Disc-to-Disc
Copies
This process will copy your master disc to several blank discs
simultaneously.
When you turn on your duplicator, after it has booted up, you
should see the following signifying your duplicator is ready.
1.
Make sure the Master Reading Source is set to the
READER.
It is very important to make sure that your current Master
Reading Source is the top tray in order to avoid
unnecessary error messages. To check the Master Reading
Source, please do the following:
a.
Press the Source hot key under the display to navigate
to the following screen.
b.
Use the bottom arrow key to scroll to Drive 1.
c. Press ENT to submit your selection.
Disc Makers 1.12
1. COPY
Hard Drive Port0.0
Drive 1 Port 1.0
t
Reflex Duplicator Manual
- 6 -
2.
Go back to 1.COPY Menu.
a.
Use UP or DOWN arrow button to navigate to the
following screen:
3.
Start the Copy Process.
a.
Insert your master disc and your blank discs into the
corresponding tray(s) and press ENT button to enter
COPY menu. You will see the duplicator mode menu like
below:
b. Press ENT
Disc Makers 1.12
1. COPY
Duplication Mode:
On The Fly
Drive 1 Port 1.0
Selected!
Preparing…
Waiting For Master
Copying… 10M
0 1% 1M
