t
Reflex Duplicator Manual
- 49 -
new image will override the previous image and all
duplications from the reserve partition will be with
the new image.
Advantage:
-
Faster duplication in a long run.
(Un-Restricted DVD Duplication speed supported
by the duplication blank media)
-
Stable duplication.
-
Reliable duplication
Disadvantage:
-
The loading time may have an impact on overall
duplication time for small duplication jobs.
-
The master disc will be loaded to the reserve
partition in the Hard Drive temporarily until a new
master is loaded and overrides the previous image.
In comparing this duplication mode with the traditional
“Duplication from Hard Drive“ process, it offers the user more
simplicity. By selecting the “Load and Copy“ mode via one
simple touch, all the necessary tasks will be automated for you.
However, in bypassing the standard “Duplication from Hard
Drive“ process, you cannot use the Partition naming feature and
the image will only remain until itís overridden by using load and
copy from another master disc.
By default, the duplication mode is set to “Auto“. This will
prompt you to choose between one of the duplication
modes when you enter any of the following functions:
“Copy“, “Test“, “Test + Copy“, and “Copy + Compare“.
If you prefer not to be prompted each time you may set
your preference by following the instructions below.
When you turn on the duplicator, you shall see following:
t
Reflex Duplicator Manual
- 50 -
Press UP or DOWN Button Consecutively until you see following:
Press “ENT“ and use the UP or DOWN arrows to navigate
to the following:
Press “ENT“ button once. You shall see following:
Press UP or DOWN Button Consecutively to select your
desired mode.
Press “ENT“ button once to submit your selection. You
shall see following:
Press “ESC“ Button once to go back to the main menu.
DISCMAKERS 1.12
1. Copy
Duplication Mode:
Load and Copy
Setup
9. Duplication Mode
Setup
10. Duplication Mode
Duplication Mode:
Prompt
DISCMAKERS 1.12
5.Setup
