Version 1.0.0 12/16/2016
After selecting Done,
may have a flashing RED network LED, and/or may have the Wireless
Connection Lost OSD. The OSD should disappear and the
to Green.
If gray screen persists, then wait 2 minutes before troubleshooting.
14) All wireless clients (
LEDs. After
F. F
INAL
C
HECKS
1) Turn on the Genie server and up to 3 clients.
2) Run System Test on the Genie server and ensure there are no Error
Codes.
3) Confirm that the LED on the WVB
4) Ensure the network LED on Clients 1, 2 and 3 (wired and wireless) is
GREEN and confirm Live TV
button. The client will display “Internet connected”).
5) If the customer has more than 3 clients, put Clients 1, 2 and 3 into Standby,
and turn on clients 4, 5 and 6.
6) Reconfirm that the LED on the WVB
7) Ensure the network LED on the Client 4, 5 and 6 is GREEN and confirm
LiveTV.
8) If the customer as a 7
and turn on Clients 7 and 8.
9) Reconfirm that the LED on the WVB
10) Ensure the network LED on clients 7 and 8 is GREEN and confirm LiveTV.
The following diagram shows the connection between the Genie, WVB
User Manual –
Wireless Video Bridge Gen 2
Page 24
After selecting Done, the wireless client (C61W) may go to gray screen,
may have a flashing RED network LED, and/or may have the Wireless
Connection Lost OSD. The OSD should disappear and the
If gray screen persists, then wait 2 minutes before troubleshooting.
wireless clients (C61W) that are ON should have solid GREEN network
After 1-2 minutes the WVB2 LED should display a solid BLUE.
on the Genie server and up to 3 clients.
Run System Test on the Genie server and ensure there are no Error
Confirm that the LED on the WVB2 is Solid Blue.
Ensure the network LED on Clients 1, 2 and 3 (wired and wireless) is
GREEN and confirm Live TV (If internet connected, press the “Dash” (
button. The client will display “Internet connected”).
If the customer has more than 3 clients, put Clients 1, 2 and 3 into Standby,
and turn on clients 4, 5 and 6.
Reconfirm that the LED on the WVB2 should still be Solid Blue.
Ensure the network LED on the Client 4, 5 and 6 is GREEN and confirm
If the customer as a 7
th
and 8
th
client, put the other Clients into Standby
and turn on Clients 7 and 8.
Reconfirm that the LED on the WVB2 should still be Soli
Ensure the network LED on clients 7 and 8 is GREEN and confirm LiveTV.
he following diagram shows the connection between the Genie, WVB
Wireless Video Bridge Gen 2
1W) may go to gray screen,
may have a flashing RED network LED, and/or may have the Wireless
Connection Lost OSD. The OSD should disappear and the LED will go back
If gray screen persists, then wait 2 minutes before troubleshooting.
solid GREEN network
LED should display a solid BLUE.
Run System Test on the Genie server and ensure there are no Error
Ensure the network LED on Clients 1, 2 and 3 (wired and wireless) is
(If internet connected, press the “Dash” (-)
If the customer has more than 3 clients, put Clients 1, 2 and 3 into Standby,
ll be Solid Blue.
Ensure the network LED on the Client 4, 5 and 6 is GREEN and confirm
client, put the other Clients into Standby
should still be Solid Blue.
Ensure the network LED on clients 7 and 8 is GREEN and confirm LiveTV.
he following diagram shows the connection between the Genie, WVB2 and C61W.
