DirecTV C61W User Manual Download Page 40

Page: 40 / 45

Field Engineering – Technical Communications –

Wireless Video Bridge Gen 2

Version 1.0.0 12/16/2016

Page 40

DIRECTV, Inc. Proprietary and Confidential

LED

State

Description

Troubleshooting Steps

Troubleshooting Steps for

Agents

steps

once Genie server is out of this
mode.

3) Complete the steps to add a

wireless client

Solid Yellow

MoCA Network Established.

MoCA Phy Rate < 180 Mbps

(Note:  Although  issues  will  be
seen  on  the  wireless  client
(C61W),  the  issues  is  not  with
the communication between the
WVB2 and C61W)

Troubleshoot the MoCA / Coax network.
Verify cabling and connectors.

1) Ensure the Coax cables on the

Wireless  Video  Bridge  and
Genie  Server  are  properly
attached and finger tight.

2) If issue persists, offer a service

call.

Blink Yellow

No MoCA Network Detected.

(Note:  Although  issues  will  be
seen  on  the  wireless  client
(C61W),  the  issues  is  not  with
the communication between the
WVB2 and C61W)

Troubleshoot the MoCA / Coax network.
Verify cabling and connectors..

1. Ensure the Coax cables on the

Wireless Video Bridge and Genie
Server are properly attached and
finger tight.

2. Reset Wireless Video Bridge by

unplugging and plugging it back in
(same as pressing the reset button).

3. Reset the Genie server.
4. If issue persists, offer a service call.

Solid Red

The

WVB2

has

good

connection to the Genie server;
however  there  is  a  Poor
Wireless  connection  to  one  or
more wireless clients (C61W).

Follow “Wireless Client (C61W) Network
LED  Failures“  troubleshooting,  above,
focusing  on  the  Wireless  Client(s)  that
has a Yellow or Red Network LED

1. Ensure that the Wireless Video

Bridge is in a vertical position.

2. If possible, ensure that there are no

obstructions (e.g., cabinets or TV).

3. Did the customer move the Wireless

Video Bridge?

a) YES: Move the Wireless Video

Bridge back to its original
location.

b) NO: Continue.

4. Did the customer move any C61W

from its original location?

a) YES: Ensure all C61W is in a

location where its Network
Status LED is GREEN.

If  customer  cannot  get  a
GREEN  LED,  explain
that  the  range  between
C61W  and  the  Wireless
Video  Bridge  is  limited
and either:

Have

customer

move

the

C61W

back to the original
location, or

ii.

If the customer does
not want to move
the C61W back to

Summary of Contents for C61W














































Search results

Summary of Contents for C61W

Reviews:

Related manuals for C61W

Brands by name

Popular brands

DirecTV C61W, User Manual

Search results

Summary of Contents for C61W

Reviews:

Related manuals for C61W

Brands by name

Popular brands