Directions Navigator 15 Manual Download Page 42

Page: 42 / 108

Navigator 15

Here you can select to show the select link on the map, add it to favourites or disable it from the routing
engine. Once a link is disabled it will not be used in future route calculations.

Tap on any navigation panel on the right of the screen to change what it displays.

A screen with several option will appear. Tap one to select it.

Here you can set what type of information you want to see in the navigation panel at the right of the
screen as you drive. Possibilities are:

DST - Distance to destination

- how far away you are in km or miles

TTA - Time to destination

- the approximate time left before you reach your destination

ETA - Time in destination

- the approximate time you will arrive at your destination

TTM - Time to maneuver

- the approximate time before your next maneuver

ALT - Altitude, SPD - Speed, AZI - Course, SAT - Number of satellites, GPS - Position, TIM - Time and
DAT - Date

give you data about your current position and the Satellite signal.

TTW - Time to the nearest waypoint

- the approximate time left before you reach the nearest waypoint

DTW - Distance to the nearest waypoint

- how far is the nearest waypoint

SPL - Speed limit

- the speed limit on the current road

Note that the number of navigation panels that is displayed can be changed in

navigation settings

Summary of Contents for Navigator 15













































































































Search results

Summary of Contents for Navigator 15

Reviews:

Related manuals for Navigator 15

Brands by name

Popular brands

Directions Navigator 15, Manual

Search results

Summary of Contents for Navigator 15

Reviews:

Related manuals for Navigator 15

Brands by name

Popular brands