53
© 2 0 0 7 D i r e c t e d E l e c t r o n i c s
Programming System Settings
Many of the features and operations of this system can be changed
to suit most of today's vehicle electrical systems. The program-
ming routine and feature menus that follow will allow making the
changes required for most vehicle installations.
System programming routine:
Accessing a Menu:
1. Turn the ignition ON and then OFF in less than 5 seconds
2. Within 3 seconds, Press/Hold the Momentary switch
3. After 2 seconds, the LED will flash and the Horn/Siren
will pulse to indicate the available menus. It will toggle
through the outputs until a menu is chosen.
a. Menu 1: 1 LED flash and 1 Horn/Siren pulse
b. Menu 2: 2 LED flashes and 2 Horn/Siren pulses
4. Release the Momentary switch after the appropriate
output in order to access that Menu. The LED and
Horn/Siren outputs will cease.
Accessing a Feature Location:
1. Press and release (do not hold) the Momentary switch
the same number of times as the feature location to be
accessed. See the Feature Chart for locations.
2. After 2 seconds the LED will flash (the number of flashes
will match with the feature location) to confirm the
feature location. It will flash/pause and repeat until the
feature is changed or programming is exited.
Summary of Contents for READY REMOTE 24927
