45
© 2 0 0 7 D i r e c t e d E l e c t r o n i c s
seconds the system will disarm/unlock and then activate this
output. The output will then remain on until the transmitter
button is released.
Retained Accessory, Dome Light or Starter Kill wire
The Brown wire has three optional uses, depending on the vehicle
application and user preference. The three available operations are
programmable in Feature Menu 2/11.
➤
RAP or Retained Accessory Power: This option is
designed to turn off accessories that remain on after the
ignition is turned off. It will pulse 10 seconds after the
remote start status output ceases. It will cause the
vehicle body control module to “think” the door has
opened, thus turning the accessories off.
➤
Dome Light Supervision: This option will turn on the
dome light for 25 seconds each time the vehicle is
unlocked. It will cease if the doors are locked or the
ignition is turned on.
➤
Starter Kill/Anti-grind: This option activates when the
doors are locked to allow for starter kill for the alarm
system, and also works as an anti-grind when the
remote start is active.
Important!
This is a low current output which
requires an external relay when connected to cir-
cuits that draw more than 400mA in current.
Important!
This is a low current output which
requires an external relay when connected to cir-
cuits that draw more than 400mA in current.
Summary of Contents for READY REMOTE 24927
