1
18
8
© 2004 Directed Electronics, Inc. Vista, CA
This wire MUST be connected to the hood pinswitch. This input will disable or shut down the remote start when
the hood is opened.
This wire supplies a 200mA output as soon as the module begins the remote start process. The H2/5 BLUE/WHITE
wire can also be used to activate the defogger trigger (latched/pulsed) 10 seconds after successful remote start.
(See the
Feature Descriptions section in this guide for details about programming this output.)
nneeuuttrraall ssaaffeettyy sswwiittcchh iinntteerrffaaccee
Some vehicles combine the column shift mechanism and the mechanical neutral safety switch into one mechan-
ical part. In these vehicles, it is impossible to interface the remote start system before the neutral safety switch.
With this type of vehicle, if the vehicle is left in a drive gear and the remote start system is activated, the vehicle
will move and may cause damage to persons or property.
According to available information, vehicles known to be manufactured this way are most General Motors trucks,
sport utility vehicles and column shifting passenger vehicles. Available information also indicates that pre-1996
Dodge Dakota pickups with 2.5 liter motors are also manufactured this way.
GM vehicles that have the neutral safety switch built into the column shifter can usually be identified by a purple
starter wire. Typically, vehicles that use an outboard mechanical switch use a yellow wire from the ignition switch
to the mechanical switch and a purple wire from the mechanical switch to the starter itself. Remember, this is
only a rule of thumb and is not intended as a substitute for proper testing.
IIM
MP
PO
OR
RTTA
AN
NTT!! Please see vehicle Safety Check section of this guide for testing procedures.
H
H2
2//5
5 B
BLLU
UEE//W
WH
HIITTEE ssttaattu
uss//d
deeffo
og
gg
geerr o
ou
uttp
pu
utt
H
H2
2//4
4 G
GR
RA
AY
Y ((--)) h
ho
oo
od
d p
piin
nssw
wiittcch
h iin
np
pu
utt