Direct Healthcare Group QUATTRO Acute, Service Manual

Page: 34 / 60

Q U AT T R O
®
A C U T E & Q U AT T R O
®
P L U S
D H G - H E A LT H C A R E . C O M 3 3
1. Unfasten all the 10 x screws of the rear case,
comprising:
2 x M4 x 30 pan head pozi
8 x M4 x 50 pan head pozi
2. Remove the bottom case from unit. Then unfasten
the 4 self-tapping screws that are associated
with the handle or each of the handles that needs
replacing.
3. Replace the hanging handle assembly using the 4 existing screws and washers .
3.2 Handle Replacement
3.3 Rear Anti-vibration Pad T19R Replacement
1. Turn the QUATTRO unit so that the rear case
is facing up and clean the area where the old
anti-vibration pad was with a TECcare CONTROL
surface wipe (other wipes can be used) to clean
off any excess adhesive from the old pad.
2. Take the new anti-vibration pad and peel the
protector away from the adhesive side of the pad.
3. Position the new anti-vibration pad and apply to
the rear case apply force for 30 seconds to get a
good bond.
B
A
A
B
1
A
B
C
C
2
C
3
HANGING
HANDLE SET
SPARE: PART
NUMBER
10993
C
1
2
REAR ANTI-
VIBRATION
FEET SINGLE
T19R: PART
NUMBER
10181
3