AIRCRAFT MAINTENANCE MANUAL
DFE-AMM-AR1
Rev. 1 – 07/24/2014
3-5
Canopy Mounting: (2 people)
1. Slide the two fuselage rails as forward as possible.
2. Two people will carry the canopy and will slide the canopy onto the fuselage rails.
Move the canopy forward and the black plastic locks will lock the canopy to the
sliding rails.
•
Task proper accomplishment check: Check proper attachment of the canopy, open and
close it. Check if it may be locked in closed position.
3.3.
WING
3.3.1. Description
The wing is of rectangular shape, consisting of reinforcements and duralumin skin, single-spar
structure with the auxiliary spar with suspended ailerons and wing flaps. Riveting is used for connecting
individual structural elements. Fiber-glass wing tips are riveted on the wing ends. There is an integral fuel
tank inside each wing in front of the main spar in the leading edge of the wing.
Ailerons
The ailerons are of rectangular shape on each half of the wing and are attached to the wing with
hinges. An aileron is formed with the ribs and cover, which forms a hollow section.
Trim tab
The right wing aileron is equipped with an adjustable trim tab, Optionally it can be fitted with an
electrically controlled trim tab.
Flaps
Two-third's of each wing is fitted with a flap. The flaps are of rectangular shape and are formed with
the ribs and cover, which forms a hollow section. The flap is attached to the wing with a hinge (3 hinges).
Fig 3-11: Wing
