AIRCRAFT MAINTENANCE MANUAL
DFE-AMM-AR1
Rev. 1 – 07/24/2014
2-13
Event
#
Event description
Inspection
Tick off performed inspection
Carried
out by:
Inspected
by:
after the
first
25
hrs.
after the first
50
hrs.
every
50
hrs.
every
100
hrs.
6.1.2.
Inspect leg attachment into the fuselage (no
play) - Lift the landing gear and move the leg
forward-backward, upward-downward; at the
same time check wheel play on the axle -
tighten attachment bolts if the leg has a play
6.1.3.
Check torque and security of fixed joints
6.1.4.
Check cloth cover which covers the leg-
fuselage input hole
6.1.5.
Check grounding
6.2.
Wheel pants or mudguards
6.2.1.
Visually check wheel pants / mudguards
condition - repair damage and cracks
6.3.
Tires
6.3.1.
Check tires for condition, cuts, uneven or
excessive wear and slippage - replace if
needed
6.4.
Wheel
6.4.1.
Visually check wheel rims for cracks,
permanent deformations - replace wheel rim
in case of cracks
6.4.2.
Check valve condition around the hole in the
disc
6.4.3.
Check condition of bearings, wheel free
rotation, play
6.5.
Brakes
6.5.1.
Check attachment of brake system
plastic hoses to the main leg
6.5.2.
Visually check condition of pads - steady and
symmetry abrasion of pads - replace pads if
needed
6.5.3.
Check wear of the disc and overheating
6.5.4.
Check brake system for leaks
- add brake fluid and bleed the system if a
brake pedal has soft movement
6.5.5.
Brake fluid replacement, clean up and
reseal brake cylinders as needed
7.
WING
7.1.
Wing
7.1.1.
Visually check condition
- no loose rivets, deformations, cracks or any
other damage - repair small damage or
contact the airplane manufacturer
7.1.2.
Check play of wing suspensions - move the
wing tip upward-downward, frontward-
rearward
7.1.3.
Check condition and attachment of fiberglass
wing tips
7.1.4.
Visual check of riveted joints leakage of
integral tank
7.1.5.
Check fuel sump drains for leaks, drain
sumps
7.1.6.
Check wire integrity and grounding
7.1.7.
Check lines
