Dinolift 10196, Operating Instructions Manual

Page: 33 / 59

33
5.2.2. Operating the lift from the platform control centre
1. Turn the selector switch to the position ”Platform control centre
UCB”, and remove the key. Do not lock the protective cover for the
chassis control centre.
Piirustuksen numero
VILAKONE OY
Tulostus pvm.
Revisio
Kpl/kone
Ohjetarra, joystick
1
41603606
2. Step onto the platform and fix the safety harness to the intended
attachment point.
3. Start using the lift normally. Operate the movements of the boom and
the platform as follows:
54.1328
Select the movement speed using one of the speed selector switches.
Selecting the movement speed will start the engine automatically.
Operate the boom using the control lever.
Whenever possible, keep the boom short while lifting and lowering the
platform.
1 2
3 4
1 2
3 4
If necessary, operate the levelling system for the work platform by
depressing the speed selector switch and using the lever switch.
Note! The movements of the boom and the platform will stop as soon as the speed
selector switch or the selector switch for the movement is released.
Selecting the movement speed will start the engine automatically.
4. With the boom slightly lifted and the telescope extended, make sure that the platform
does not lower by itself while the operating controls are not being used.
5. Drive the platform to the work object.
DANGER
WARNING
CAUTION
NOTICE
The lift itself, the buildings around it and other obstructions constitute a risk of getting
squeezed. Hands and legs must be kept inside the work platform while the platform is
moving. Also beware of any obstacles above the platform.
IF THE SAFETY DEVICES OR THE EMERGENCY DESCENT SYSTEM ARE NOT
WORKING, HAVE THEM REPAIRED BEFORE OPERATING THE LIFT.
If several control levers are operated simultaneously, only the movement with the least
resistance will operate.
Working a long time in the same position
• During cold weather, the power pack must be left running to keep the hydraulic oil warm.
• Check the stability and condition of the base regularly during the operation, taking into
account the weather and ground conditions.