Dinolift 10196, Operating Instructions Manual, Page: 17 / 59

17
TRANSFERS
Observe the maximum allowed gradient when transferring the lift. During transfer in rough
terrain, always try to position yourself higher than the machine.
Beware of fixed or moving obstacles in the terrain or near the lift while driving. Make sure
that you have a clear view of the driving path.
Do not use the machine for towing.
WORK AREA AND PREPARATIONS BEFORE LIFTING WORK
When working in busy areas, the operating range of the lift must be clearly marked by using
either warning lights or fencing.
Also observe the road traffic regulations.
Ensure the unobstructed range of movement before operating the stabilisers.
The load-bearing capacity and the gradient of the base must be taken into account when
supporting the chassis. Do not operate the machine while it is placed on a truck, railway car,
floating vessel or other possibly unstable structures.
Ensure that the stabilisers cannot slide while on a gradient.
Additional support plates of adequate size must be used under the stabilisers, when working
on soft ground. Only use such additional support plates, on which the metallic stabilisers will
not slide.
While in the support position, ensure that the wheels are off the ground.
Always verify the horizontal position of the machine before operation.
Always ensure that the work area is clear of outsiders. Danger of getting crushed between
rotating and fixed structures.
While operating the boom from the control centre on the turning device, beware of
getting pressed against the stabilisers or other structures that do not turn with the
boom.