Dinolift 10196 Operating Instructions Manual Download Page 57

Page: 57 / 59

CHANGE OF OWNER

For the owner of the lift:

If you have purchased a used DINO lift from some other than the manufacturer, please post

your details to the manufacturer using the form on this page, and send it to:

[email protected]

This information makes it possible for us to provide you with the safety bulletins and other

campaigns relevant to your machine.

Note! It is not necessary to inform about a rented machine.

Machine model:

DINO _______________

Serial number:

_______________

Previous owner: _____________________________________________

Country:

_________________________________________

Date of purchase: _______________

Current owner:

______________________________________________

Address:

___________________________________

Country:

___________________________________

Contact person

Name and position in the company:

___________________________________

Telephone:

___________________________________

E-mail: ___________________________________

Summary of Contents for 10196




























































Search results

Summary of Contents for 10196

Reviews:

Related manuals for 10196

Brands by name

Popular brands

Dinolift 10196, Operating Instructions Manual

Search results

Summary of Contents for 10196

Reviews:

Related manuals for 10196

Brands by name

Popular brands