Dinolift 10196, Operating Instructions Manual

Page: 18 / 59

18
Operating instructions • DINO 105TL
LIFTING AND WORKING ON THE PLATFORM
Never exceed the maximum number of persons, maximal loading or manual force, allowed
for the lift. Never add load onto the platform while in the upper position.
Before operating, always ensure that the safety devices and the emergency descent system
are in working order.
Use the safety harness!
Fix the safety harness
to the fixing points, intended for the purpose.
Note! The platform is fitted with a fixing point for the
safety harness of each user. Only one harness per
fixing point.
Do not use ladders, steps or other similar equipment
on the platform.
Before operating the machine, make sure all gates are properly closed.
If the platform is fitted with a ladder, the ladder must be locked in the upper position.
Never throw or drop any objects from the platform. All tools must be carried inside the work
platform. Never leave power tools hanging by the cord outside the work platform.
Do not carry tools, equipment or materials on or attached to the platform railing.
The lift must not be used as a crane.
The lift must not be used for transferring goods or persons between different floors or
working levels. Stepping on or off the platform in motion is prohibited.
When the boom is in its lowest positions, make sure it cannot clash during rotation with
structures that do not turn with the boom.
Always make sure, before lowering the platform, that the area under it is clear.
Avoid damaging the platform by lowering it on the ground, or bringing it in contact with any
structures.
Never use a lift alone. Make sure that there is always someone on the ground, who can call
for help in case of an emergency.