Dinolift 10196, Operating Instructions Manual

Page: 15 / 59

15
The initial inspection and test loading of the Dino aerial work platforms is performed by the
manufacturer. A protocol, drawn up during the inspection, will accompany the lift.
The protocols of the start-up and periodic inspections must be kept with the lift or its
immediate proximity for at least five years.
INSPECTION POINTS (Y = meet standards N = do not meet standards not applicable)
Y N Y N
A. GENERAL REQUIREMENTS
1. Suitability for use D. ELECTRIC SYSTEM
2. Certificate of conformity 1. Electric system
3. User manual and storage 2. Electric appliances
4. Machine plate - inspection plate 3. Lights
5. Instructional and safety plates
6. Safety colours E. SAFETY AND CONTROL DEVICES
1. Safety sensors and limit switches
2. Sound signal
3. Emergency descent system
B. STABILITY 4. Protection of controls
1. Load plate and reach diagram 5. Symbols / control directions
2. Supports / outriggers 6. Placement of controls
3. Indicator for horizontal position 7. Emergency stop
C. STRUCTURES F. SAFETY FEATURES
1. Transport position / transp. equipment 1. Prevention of unauthorized use
2. Driving/towing equipment 2. Locking device, covers and guards
3. Chassis 3. Prevention of lifting
4. Turning device 4. Prevention of opening of support
5. Boom system 5. Safety distances
6. Structure and position of work platform 6. Control of loading
7. Hydraulic system 7. Limiting devices
G. TEST LOADING
1. Overload test (150%) 195 kg
2. Functional test (110%) 145 kg
COMMENTS
DEFICIENCIES
Deficiencies have been repaired
Date: Signature: