Dinli DL-901, Service Manual

Page: 74 / 136

【
6-17
】
ENGINE
CRANKCASE 2
●
(When replacing Bearing with new one) Install Bearing
Retainer Plates.
Stopper Plate for Main Shaft Bearing
Tightening Torque: 12 - 14 N-m
Fastener:M6 Hex bolt 1 pcs.
Stopper Plate B for Shift Drum Bearing
Tightening Torque: 7 – 9 N-m
Fastener: M6 Hex bolt 1 pcs. Apply TB #1316 to threads.
●
Install Drain Plug.
Tightening Torque: 7 - 9 N-m
Fastener: M16 Bolt 1 pcs.
●
Fit Oil Strainer UN.
●
On plastic containers, place Crankcase 2 with the mating
surface to crankcase 1 upwards.
●
Apply TB #1215 evenly onto the mating surface.
●
Adjust the convex position on the end surface of Water Pump
Shaft to meet with the groove on the end surface of
Balancer Shaft (on Crankcase 1 side).