【
2-9
】
WHEELS/TIRES
Front Hub Removal
●
Remove the cotter pin [A] and loosen the axle nut [B].
●
Remove the wheel (see Wheel Removal).
●
Remove the caliper by taking off the mounting bolts [C],
and let the caliper hang free.
●
Remove the axle nut and pull off the front hub brake disc.
●
Separate the brake disc from the front hub.
Front Hub Installation
●
Grease::
Seal
Front Spindle
●
Tighten:
Torque - Front Spindle Nut: 145 N-m (15.0 kgf-m, 110
ft-lb )
●
Insert a new cotter pin [A] and bead it over the nut [B]
Front Hub Disassembly/Assembly
●
Don not press the hub bolts out.
★
If any hub bolt [A] is damaged, replace the hub [B] and
bolts as a unit.
Summary of Contents for DL-901
