Dinli DL-702 2008, Service Manual

Page: 84 / 306

【
4-33
】
SUSPENSION/STEERING/DRIVE SHAFT
●
When installing the tie rods, make sure the short sides [1] of the
tie rods come outside.
Handlebars
●
When installing the handlebars on the handlebar lower clamp,
align the brake reservoir on the horizontal direction of the
handlebar.
●
Install the handlebar upper clamps as shown.
●
First, tighten the bolts [1] to the specified torque, and then tighten
the bolts [2] to the specified torque.
Tightening Torque: 26 N-m (2.6 kgf-m, 19.0 lb-ft)
●
Make sure the cable, harness and brake hose are routing properly.
NOTE
The locknuts [2] have left-hand threads.
1
1
2
1
2