1.
Features
Input power: DC 24V-72V
It has offline function, adopts RS-485 isolated bus, supports standard MODBUS-RTU
protocol, and can mount up to 30 devices
Bus-type driver can realize long-distance reliable control, effectively solve the problem of
pulse loss in interference environment
The user can set the current, subdivision and lock current, running mode (pulse input mode,
point control mode) through the bus;
Run real-time status queries
Built-in single-axis controller function: users can set parameters such as start speed,
acceleration time, deceleration time, maximum speed, and total pulse number through the
bus
Deceleration position control function, support position control, speed control and return to
origin mode
3 channels of optically isolated input (5-24VDC compatible); pulse, direction, and offline
input ports are programmed as general-purpose input ports in point control mode to receive
external signals
Control signal to realize the functions of driver enable, start stop, emergency stop, limit, etc.
1 optical isolation programmable output interface, output driver status and control signal
Motor short circuit protection
Trial run function
16 constant-speed constant-angle subdivisions
Smooth and accurate current control, low heat generation of the motor
When the step pulse stops for more than 500ms, the motor current enters the idle current
Excellent smoothness at low subdivisions
Adjustable driving current peak below 6.5A
With over-voltage, under-voltage, over-current protection functions
page
│
3
Features
