DINGO 150, User Manual

Page: 30 / 179

PERIODIC SERVICING
ENGINE OIL TESTING AND CHANGING
At a factory the snowmobile is filled with a transporting oil for SAE 10W30 API
SF-CC gasoline engines. Before you start operation oil should be replaced. It is
recommended to use oil specially intended for four cycle snowmobiles engines, but
using of a usual oil for four cycle gasoline engines is possible. An oil viscosity can be
chosen in accordance with a climate according to specified scheme.
Don't throw waste oils to waste receptacles and don't pour it on earth or to drain
water.
Oil level check:
Check oil level before every trip. Put your snowmobile on an even horizontal surface. Take off
an oil gage (1) and clean it off oil. Insert it into a sump hole without screwing it into a screw thread (2) and take it off for level check. Oil
level should be between the upper ('H') and lower ('L') marks. If needed, add to the sump certain amount of oil of a grade filled to the
engine before. Don't overfill over upper mark. Engine operating with a lack of oil or excess oil may be a cause of damage.
29