DINGO 150, User Manual, Page: 24 / 179

BASIC CONTROL
Transmission:
The snowmobile is equipped with an automatic transmission - variator.
Transmission selector
lever is located in the right side in the direction of travel of the snowmobile and
serves for switching to forward or back running, as well as switching off the
neutral.
1.
«F»
- Forward running position. It is switched on when the lever is 'pushed
off' from the 'Neutral' position.
2. N»
- Neutral;
3.
«R»
- Position
«Reverse ». Switching on is performed with a switch
shifting to 'pull' position;
Back run switching on is performed after the full stop of the snowmobile, it is
prohibited to switch it on in motion
–
this may lead to transmission breakdown.
Back running may be used on a smooth surface only. Be attentive and careful
–
the snowmobile may develop a quite high speed!
Also, during the snowmobile movement it is prohibited to shift the
transmission
selector lever to 'N' position
–
this may lead to transmission breakdown.
Back run switching on is performed only after the full stop of the snowmobile, it is
prohibited to switch it on in motion. Back running may be used on a smooth surface only.
During the snowmobile movement it is prohibited to shift the transmission selector lever to
'N' position
–
this may lead to transmission breakdown.
23
BASIC CONTROLS