Dimplex LWP200, Installation And Operating Instructions Manual

Page: 28 / 52

EN-12 451903.66.17 · FD 9908 www.gdts.one
English LWP 200E
12 Technical data
1 Type and order code
LWP 200E
2 Design
2.1 Defrosting No
2.2 Nominal cylinder volume litre 200
2.3 Transfer area of the internal heat exchanger m
2
-
2.4 Sensor pipe ø
internal
for external sensors mm
-
2.5 Installation location Frost-free
2.6 Cylinder material Enamelled steel complying with DIN 4753
2.7 Cylinder insulation PU with foil cladding
2.8 Nominal cylinder pressure bar 10
3 Operating limits
3.1 Heat source operating limit °C 15 to 35
3.2 Domestic hot water setting range in heat pump operation °C
23 to 60
± 1.0 K
4 Flow / sound
4.1 Air flow level I II III m
3
/h
60, 90, 140
4.2 External compression, level III Pa 120
4.3 Sound power level I / II / III dB(A) 46.7 / 54.4 / 64.5
4.4 Sound pressure level I / II / III
1
dB(A)
1. At a distance of 1m (free-standing installation or installation without exhaust air duct or 90° pipe bends on outlet side).
36.8 / 45.3 / 55.9
5 Dimension/weight and filling quantities
5.1 Dimensions height (max.) x cross-section (max.) mm 1700 x 550
5.2 Air duct connection diameter mm 125
5.3 Weight (empty) kg 85
5.4 Refrigerant R 134a/total filling weight (kg) 1.0
5.5 GWP value / CO
2
equivalent --- / t
1430 / 1
5.6 Refrigeration circuit hermetically sealed yes
6 Electrical connection
6.1 Degree of protection IP 21
6.2 Connection voltage 1/N/PE~230 V, 50 Hz
6.3 Connecting cable approx. 2.7 m - 1.5 mm
2
With plug
6.4 Fuse max. A C16
6.5 Power consumption heat pump cos

A
0.8
6.6 Supplementary electrical heating power consumption A 6.5
6.7 Power consumption max. A 8.7
6.8 Heat pump nominal power consumption at 45 °C
2
W
2. Air intake temperature of 20 °C and relat. humidity of 70 %
253
6.9 Supplementary electrical heating power consumption W 1500
6.10 Total power consumption max. W 1900
7 Hydraulic connection
7.1 Circulation pipe connection external thread -
7.2 Domestic hot water outlet connection external thread R 3/4“
7.3 Cold water inlet connection external thread R 3/4“
7.4 Internal heat exchanger connection external thread -
8 Performance values
8.1 Heating-up period from 15 °C to 45 °C
2
h
7.6
8.2 Mean heat output at 45 °C
2
W
910
8.3 COP (t) complying with EN 255 at 45 °C 3.4
8.4 Stand loss in 24h
3
W
3. Room temperature 20 °C (heat pump operation)
1.13