Dillon Precision Products Square Deal B, Assembly And User Instructions Manual, Page: 14 / 61

14
7.1. Station 1— Case is Deprimed and Sized
•
The user inserts a case into the Shellplate
•
Cases are de-primed and sized on the downstroke of the Operating Handle
•
On the upstroke, the case is indexed to Station 2 and a Primer is picked up by the Primer Slide and fed into
Station 2
Station 1—Case Deprimed and Sized
7.2. Station 2—Primers Are Automatically Fed and Seated, The Case Is Flared (Belled) and the Powder
Dispensed
•
Primers are seated on the “full-push stroke” of the Operating Handle from the “at-rest” position of the
Operating Handle
•
On the downstroke, the case mouth is belled (flared) and powder dispensed into the case
•
On the upstroke, the case is automatically indexed to Station 3
Station 1--Case entering Depriming/Sizing
Die as the Operating Handle is lowered
raising the Shaft/Shellplate
Station 2—Primer Seated, Case Flared, Powder Dispensed
Station 1--Case manually
inserted into Shellplate
Station 2—Case being pushed over
the nose of the Powder funnel
belling the case mouth and dropping
powder into the case
Station 2— Typical
Dillon Powder Funnel—
fits inside the Powder
Die
Station 1—On the upstroke the case is indexed to
station 2 and a primer is picked up and presented to
Station 2
Case not shown
in Station 2 for
clarity
Station2--Primer seated push stroke of the Operating Handle
from the at rest position
Neutral
“at-rest”
Position
Primer
seating
position
Station2--Case mouth flared and powder dispensed
on the down stroke of the Operating Handle
Belling Feature of
Powder Funnel